| Product Family |
Design |
Length (Above Grade) |
Pole Base OD |
Pole Top OD |
Wall Thickness |
Anchor Bolts |
Base Type |
Finish Type |
Finish Color |
Fixture Mounting |
| WD = WiLLstudio™ |
RSAA = Round Straight Aluminum Anchor Base Light Pole |
8 = 8' |
40 = 4" |
40 = 4" |
C = 0.125" |
AB = Includes Anchor Bolts |
SB = Standard Base |
FP = Finish Painted |
BK = Black |
PC = Cap Only, No Side Drilling |
|
RSAD = Round Straight Aluminum Embedded Light Pole |
10 = 10' |
50 = 5" |
50 = 5" |
D = 0.188" |
LAB = Less Anchor Bolts |
CB = Custom Base |
AN = Anodized |
MB = Medium Bronze |
PL = Open Top, No Cap |
|
RSAFA = Round Straight Aluminum Fluted Anchor Base Light Pole |
12 = 12' |
60 = 6" |
60 = 6" |
E = 0.250" |
C = Custom |
|
WG = Decoral® Wood Grain System |
DB = Dark Bronze |
PF = Flush Arm Fit |
|
RSAFD = Round Straight Aluminum Fluted Embedded Light Pole |
14 = 14' |
C = Custom |
C = Custom |
C = Custom |
|
|
C = Custom |
WH = White |
D1 = Drill Single |
|
SSAA = Square Straight Aluminum Anchor Base Light Pole |
16 = 16' |
|
|
|
|
|
|
NA = Nat Alum Silver |
D2 = Drill 2@180 |
|
SSAD = Square Straight Aluminum Embedded Light Pole |
18 = 18' |
|
|
|
|
|
|
LG = Light Gray |
D3 = Drill 3@120 |
|
C = Custom |
20 = 20' |
|
|
|
|
|
|
SG = Slate Gray |
D4 = Drill 4@90 |
|
|
C = Custom |
|
|
|
|
|
|
DG = Dark Green |
D5 = Drill 2@90 |
|
|
|
|
|
|
|
|
|
DP = Dark Platinum |
D6 = Drill 3@90 |
|
|
|
|
|
|
|
|
|
GM = Graphite Metallic |
P1 = 4" OD x 5" Long Tenon |
|
|
|
|
|
|
|
|
|
BA = Bronze Anodized |
P2 = 2.38" OD x 4" Long Tenon |
|
|
|
|
|
|
|
|
|
BKA = Black Anodized |
P3 = 3.50" OD x 6" Long Tenon |
|
|
|
|
|
|
|
|
|
SA = Satin Silver Anodized |
P4 = 4" OD x 6" Long Tenon |
|
|
|
|
|
|
|
|
|
WG1 = Colony Maple Wood Grain |
P5 = 2.88" OD x 4" Long Tenon |
|
|
|
|
|
|
|
|
|
WG2 = TBD Wood Grain |
P6 = 2.88" OD x 5" Long Tenon |
|
|
|
|
|
|
|
|
|
WG3 = TBD Wood Grain |
P7 = 2.38" OD x 5" Long Tenon |
|
|
|
|
|
|
|
|
|
WG4 = TBD Wood Grain |
PQ = 2.38" OD x 12" Long Tenon |
|
|
|
|
|
|
|
|
|
WG5 = TBD Wood Grain |
PD = 3" OD x 3" Long Tenon |
|
|
|
|
|
|
|
|
|
RAL = Custom RAL Match |
P9 = Custom Size Tenon |
|
|
|
|
|
|
|
|
|
C = Custom |
|
| Options |
Options |
Accessories |
| SPL = Special Cut Length (Please Specify) |
HHU = Additional Unreinforced Hand Hole Opening w/ Cover Assembly |
STAMP = Engineering Services, Signed & Sealed Calcs |
| BCSPCL = Special Base Plate to Match Existing Bolt Circle (May Add to Production Lead Time, May Require Special Base Cover) |
HHR = Additional Reinforced Hand Hole Opening w/ Cover Assembly |
STAMPCA = Engineering Services, CA Signed & Sealed Calcs |
| VDA = Internal Vibration Dampener, Factory Installed |
FSTR = Festoon Provision, Electrical by Others
(Specify Pole Height & Orientation, Minimum 37” Above Base Plate) |
PRE063 = Pre-Ship Anchor Bolts - 0.625" x 16" x 2" |
| PXDX = Side Drill + Tenon w/ Additional Hand Hole (Specify Tenon OD & Length) |
CPL = NPT Pipe Coupling (Specify Pole Height, Orientation & NPT Size) |
PRE075 = Pre-Ship Anchor Bolts - 0.75" x 17" x 3" |
| |
EVC = Electric Vehicle Charger Provision, Includes Single Drilling & Hand Hole at 180°, Height & Orientation TBA |
PRE100 = Pre-Ship Anchor Bolts - 1.0" x 36" x 4" |
| |
CMR = Camera Provision, Includes Single Drilling & Hand Hole at 180° (If Not Located at Pole Top) |
VDF = Internal Vibration Dampener, Field Installable |
| |
|
BA24-1/2 = 24" Wind Shedding Banner Arm Kit, For Banners Less Than 17.5 sq ft, 24" Fiberglass Arms, Bolt Mounted to Pole, Finished to Match Pole (Field Installed) |
| |
|
BA30-1/2 = 30" Wind Shedding Banner Arm Kit, For Banners Less Than 17.5 sq ft, 30" Fiberglass Arms, Bolt Mounted to Pole, Finished to Match Pole (Field Installed) |
| |
|
FH-1/2 = Flag Holder, Stainless Hardware Included (Field Installed) |
| |
|
PH-1/2 = Plant Holder, Stainless Hardware Included (Field Installed) |
Note: Custom products, configurations, options, and accessories available.
